Baker's twine.....

Posted by 2craftypauline, 19 Sep, 2012

Using a white square card, I started by cutting a star shape with X-cut nesting die number 3. I used the cut out shape for the baker's twine feature. Tip - to avoid too much bulk in the centre don't wrap the twine over and over the circle, but, instead loop it around each point of the star. Also because there are an odd number of points on the star you will need to start from the centre, anchoring the thread in place before you start. Again, using the Big Shot I cut the heart shape from Papermania Glitter Card with the X-cut nesting die. Another tip - I find that I get a cleaner cut if I put the die on the plain side of the glitter card. I decorated the front of the card with a piece of Home for Christmas paper cut slightly smaller than the card and again using the star die cut. The section I removed I divided into four and used to finish off the inside of the card.

{{comments.length}} Comments

View All Comments